Liquidity Sweep Quality Score: A Smarter Way to Rank Sweep Setups
TL;DR
- A liquidity sweep happens when price pushes beyond a recent swing high or low, then closes back inside the prior range.
- The TradeDots Liquidity Sweep Quality Score indicator does more than mark sweeps — it gives each one a 0–100 quality score.
- The score is built from wick rejection, relative volume, failed-break strength, higher-timeframe proximity, follow-through, and trend-regime context.
- A+ / A / B / C / D / Weak labels help traders quickly separate stronger sweep candidates from low-quality noise.
- You can try the indicator for free on TradingView: search for “Liquidity Sweep Quality Score [TradeDots]”, or use the published TradingView script link once available.
What is a liquidity sweep?
A liquidity sweep is a price move that briefly breaks beyond a visible swing high or swing low, then closes back inside the prior range. In practice, traders often watch these moves because they can reveal failed breakouts, stop runs, or rejected attempts to continue in one direction.
For example, a bullish sweep occurs when price trades below a recent swing low but closes back above that swing low. A bearish sweep is the opposite: price trades above a recent swing high but closes back below it.
The problem is that not every sweep deserves the same attention.
Some sweeps are sharp, high-volume rejection events near important levels. Others are weak wicks inside noisy price action. A simple “sweep happened” marker can be useful, but it does not answer the more important question:
Was this sweep actually high quality?
That is the problem the Liquidity Sweep Quality Score [TradeDots] indicator is designed to solve.
What does the Liquidity Sweep Quality Score indicator do?
The Liquidity Sweep Quality Score indicator detects bullish and bearish sweep events on your TradingView chart, then assigns each sweep a 0–100 composite score and a simple letter grade: A+, A, B, C, D, or Weak.
Instead of treating every sweep as equal, the indicator ranks each setup using multiple evidence factors. It looks at the candle rejection, volume context, failed-break decisiveness, proximity to higher-timeframe levels, next-bar follow-through, and whether the sweep is fighting a strong trend.
That gives traders a cleaner way to filter sweep signals.
A weak sweep can still be marked, but the score tells you not to overreact. A stronger sweep with a B, A, or A+ grade deserves more attention because more of the supporting evidence is present.
Why score liquidity sweeps instead of just detecting them?
Binary sweep detection answers only one question: “Did price sweep a prior swing level?” A scoring model answers a better question: “How much evidence supports this sweep as a usable setup?”
That difference matters because sweep-based strategies can become noisy fast.
A chart may print many apparent stop runs or failed breaks, especially on lower timeframes. Without a quality filter, traders can end up reacting to every wick. The Liquidity Sweep Quality Score indicator adds structure by ranking each sweep rather than simply highlighting it.
The score is not a prediction. It does not claim that an A+ sweep must reverse or that a Weak sweep cannot work. It is an evidence-weighting tool. Its job is to help traders compare setups more consistently.
How does the indicator detect a bullish or bearish sweep?
The indicator tracks confirmed swing highs and swing lows using pivot logic. A bullish sweep is detected when the current bar trades below the most recent confirmed swing low and closes back above it. A bearish sweep is detected when the current bar trades above the most recent confirmed swing high and closes back below it.
The script also applies a wick-to-body filter.
That means a candle needs to show enough rejection wick relative to its body before the sweep qualifies. This helps filter out small, low-conviction pokes beyond a level.
The sweep marker appears on the sweep candle itself. The final grade label appears on the next candle because the indicator waits for one bar of follow-through before completing the score.
This is intentional: the indicator would rather delay the full grade by one bar than publish a score before follow-through evidence exists.
What factors are included in the score?
The composite score is built from six factors. Five are positive evidence factors, and one is a penalty applied when the market regime works against the sweep.
Wick rejection strength
- What it measures: Rejection wick relative to candle body
- Why it matters: Larger rejection wicks suggest stronger rejection of the swept level
Relative volume
- What it measures: Sweep-bar volume percentile versus recent history
- Why it matters: Higher-volume sweeps may carry more participation
Failed-break decisiveness
- What it measures: How far price closes back inside the prior range, measured in ATR units
- Why it matters: Stronger closes back inside the range show clearer failure of the break
Higher-timeframe proximity
- What it measures: Distance to the prior higher-timeframe high or low
- Why it matters: Sweeps near major levels may be more meaningful than random intra-range wicks
Follow-through confirmation
- What it measures: Whether the next candle moves in the expected direction
- Why it matters: Adds immediate confirmation after the sweep
Regime penalty
- What it measures: Whether the sweep fights a strong trend based on ADX and EMA alignment
- Why it matters: A reversal attempt against a strong trend should be treated with more caution
The result is a normalized 0–100 score.
The grade mapping is simple:
- A+: 90+
- A: 80–89
- B: 70–79
- C: 60–69
- D: 50–59
- Weak: below 50
How should traders read the chart?
The indicator gives you three main visual layers: sweep markers, grade labels, and a dashboard.
A small triangle marks the sweep candle itself. A bullish sweep marker appears below the bar, while a bearish sweep marker appears above the bar.
The grade label appears on the next bar, after follow-through has been evaluated. This label shows the direction, the letter grade, and the numeric score. The label color shifts across a red-to-green gradient based on quality.
The dashboard shows the most recent sweep and breaks down the sub-scores, including Wick Rejection, Relative Volume, Failed Break, Higher-Timeframe Proximity, Follow-Through, Regime Penalty, Composite Score, and Grade.
This is useful because two sweeps with the same final grade can have very different personalities. One might score well because of volume and follow-through. Another might score well because it happened near a higher-timeframe level with a strong failed-break close.
The dashboard helps traders understand why the score was assigned.
What makes this different from a normal liquidity sweep indicator?
Most liquidity sweep indicators focus on detection. They mark where price sweeps a prior high or low, then leave the trader to decide whether the event matters.
The TradeDots Liquidity Sweep Quality Score indicator adds a transparent scoring layer.
That is the main difference.
It does not just say “bullish sweep” or “bearish sweep.” It ranks the sweep using several measurable pieces of evidence. Each sub-factor is normalized, weighted, and shown in the dashboard, so traders can inspect the logic instead of blindly trusting a signal.
This makes the tool more useful for traders who already understand market structure but want a more disciplined way to filter setups.
Does the indicator repaint?
The indicator is designed around confirmed-bar logic. Sweep detection, scoring, label placement, and alert triggers are gated at bar close.
For higher-timeframe levels, the script uses prior higher-timeframe bar values rather than unfinished higher-timeframe data. In practical terms, it reads the previous higher-timeframe high and low, not the still-forming current higher-timeframe candle.
The final grade is also deliberately placed one bar after the sweep because follow-through is part of the score. That delay is not repainting; it is part of the scoring design.
As always, traders should test any indicator on their own markets and timeframes before relying on it in a live workflow.
How can you use the Liquidity Sweep Quality Score indicator?
Use it as a quality filter, not as a complete trading system.
A simple workflow looks like this:
- Start with your own context: range extreme, higher-timeframe level, trend pullback, divergence, or support/resistance area.
- Wait for the indicator to mark a bullish or bearish sweep.
- Read the grade label on the follow-through bar.
- Use the dashboard to inspect why the setup scored the way it did.
- Treat stronger grades — especially B, A, and A+ — as candidates for deeper review.
- Keep risk management separate: entries, stops, targets, and position sizing remain your responsibility.
This is important: a high-grade sweep is not a guaranteed reversal signal.
It simply means the sweep had more of the evidence factors the model is designed to evaluate.
What alerts are available?
The indicator includes TradingView alert conditions for higher-quality sweep events.
Available alert types include:
- A+ Setup
- A Setup
- B Setup
- Bullish Sweep with quality at or above 70
- Bearish Sweep with quality at or above 70
- Any Sweep with score at or above 80
This lets traders monitor multiple charts without staring at every candle. You can configure TradingView alerts around the quality threshold that fits your own trading process.
For example, a conservative trader may only want A and A+ setups. A more active trader may want to watch all B-grade or better sweeps.
Who is this indicator best for?
The Liquidity Sweep Quality Score indicator is best for traders who already use price action, market structure, support/resistance, or reversal setups — but want a more systematic way to evaluate sweep quality.
It may be useful if you:
- Trade failed breakouts or stop-run reversals
- Watch swing highs and swing lows
- Want to filter sweep signals by quality
- Prefer transparent scoring over black-box buy/sell signals
- Use TradingView alerts as part of your workflow
- Want to compare bullish and bearish sweep setups across symbols
It is probably not the right tool if you want a fully automated strategy that tells you exactly when to enter, where to stop, and where to take profit.
This is an indicator, not a trading system.
Try Liquidity Sweep Quality Score free on TradingView
If you want a cleaner way to evaluate liquidity sweeps, try Liquidity Sweep Quality Score [TradeDots] on TradingView.
Instead of treating every wick through a swing level as equal, the indicator helps you rank sweeps by rejection strength, volume, failed-break quality, higher-timeframe context, follow-through, and trend regime.
Try Liquidity Sweep Quality Score free on TradingView
FAQ
Is Liquidity Sweep Quality Score a buy/sell signal?
No. It is a quality-scoring indicator for liquidity sweep events. It can help identify and rank bullish or bearish sweep setups, but it does not manage entries, stops, targets, or position sizing.
What does an A+ sweep mean?
An A+ sweep means the setup scored 90 or higher on the indicator’s composite quality model. It means multiple evidence factors were present. It does not guarantee a profitable trade or a future reversal.
Why does the grade label appear one bar after the sweep?
The indicator includes follow-through confirmation as part of the score. Because follow-through requires the next candle, the final grade is drawn one bar after the sweep candle by design.
Can I customize the scoring?
Yes. The script exposes weights and thresholds, including swing pivot lookback, wick-to-body ratio, ATR length, volume lookback, higher-timeframe reference, ADX threshold, and score factor weights.
Does the indicator work on all markets?
The logic can be applied across markets supported by TradingView, but performance and usefulness will vary by symbol, timeframe, liquidity, volatility, and trading style. Test it before using it in a live workflow.
Is this financial advice?
No. The indicator is for informational and educational use only. It is not investment advice and is not a recommendation to buy or sell any instrument.
Ready to level up your trading?
Join active traders using TradeDots Sophus AI to read the market with confidence.
